CE MARK

Recommended Medical masks for primary / outpatient / community and social care settings.

Fluid-resistant (Type IIR) surgical mask is Recommended for primary, outpatient, community and social care by setting, NHS and independent sector

Type IIR Fluid Repellent
CE Certified to EN14683:2019
High bacterial filtration efficiency (BFE) ≥ 98%
Masks come in resealable bag
Fluid Resistant

See other masks here

High filtration efficacy acc. to EN 14683, Type II R Fluid Resistant. These masks have different layer materials and thicknesses to correctly reach Type II R Mask (EN14683) certification.

Outer layer: polypropylene non-woven fabric, water-repellent effect layer.
Middle layer: High efficiency blown melt.
Inner layer: polyester soft skin-friendly non-woven fabric

Please be aware, there are many other masks on online market places with zero certification as well as only having 95% high bacterial filtration efficiency (usually sold as dust masks).

Specifications

Size: (17.0 ± 0.5)cm x (9.0 ± 0.5)cm
Filtration Efficiency: EN14683:2019 Annex B >98%
Outer layer: PP Non-woven.
Middle layer: Melt-blown.
Inner layer: PP Non-woven.
Ear loop: Urethane Elastic Fiber.
Nose clamp: Iron wire with plastic coasting.
Please note we are unable to accept refunds or returns on infection control products such as face masks

Melt Blown Fabric Technology

Our masks feature a once-obscure material called melt-blown fabric. It’s an extremely fine mesh of synthetic polymer fibres that forms the critical inner filtration layer of a mask, allowing the wearer to breath while reducing the inflow of possible infectious particles. There are many non-certified medical masks on other marketplaces that do not have this – they are just three layers of non woven material. Demand for melt-blown fabric is very high.